Page Graphics

Circuit Protection

Blade Fuse Holders


Our Blade Fuse Holders are available with a splash proof lid for use in harsh environments. We have a wide range of automotive and marine accessories.

Individual fuse holders. Accepts blade fuses. 

Part No Rating (Amps) Cable Conductor Cross Section (mm²) Cable Colour Lid Pack Sizes
FH410 20 1.3 Black No 10, 100
FH412 10 1.3 Red No 10, 100
FH415 20 2.0 Black No 10, 100
FH420 30 3.3 Orange No 10, 100
FH425 30 3.3 Black No 10, 100
FH430 20 1.3 Black Yes 10, 100
FH432 10 1.3 Red Yes 10, 100
FH435 20 2.0 Black Yes 10, 100
FH440 30 3.3 Orange Yes 10, 100
FH445 30 3.3 Black Yes 10, 100

Individual fuse holder, shown with transparent push-on cover
Fixing plate and screw used for securing FH210 to a firm surface

FH210 Individual fuse holder, accepts blade fuses. Several fuse holders can be clipped together to form a multiple fuse block. The cable connections are made by 2 x 6.3mm blade terminals which are pre-fitted into the base of the fuse holder.
Pack sizes 10, 100.

FH210C Transparent 'Push On' cover for FH210.
Pack sizes 10, 100.

FH210P Fixing plate and screw, used for securing FH210 or FH220 to a firm surface.
Pack sizes 10, 100.

Individual fuse holder, accepts blade fuses

FH213 Individual fuse holder, accepts blade fuses. The cable connections are made by 2 x 6.3mm blade terminals.
Pack sizes 10, 100.

Individual fuse holder, accepts blade fuses

FH220 Individual fuse holder, accepts blade fuses. Several fuse holders can be clipped together to form a multiple fuse block. The cable connections are made by 2 x 6.3mm blade terminals.
Pack sizes 10, 100.

FH210P Fixing plate and screw, used for securing FH220 to a firm surface.
Pack sizes 10, 100.

Individual fuse holders, accepts blade fuses

Individual fuse holders, accepts blade fuses. This splashproof fuse holder can be clipped together to form a multiple fuse box. The fuse holder is supplied complete with cover, silicon gasket, terminal locking bar, 2 terminals and 2 seals.

Part No Terminals To Fit Cables (mm²) Pack Sizes
FH241 0.5 – 1.5 10, 100
FH242 2.0 – 3.0 10, 100

Individual fuse holder, accepts blade fuses

FH225 Individual fuse holder, accepts blade fuses. This easy to use fuse holder snaps onto the cable without the need to cut or terminate the cable.

  • Rated up to 20 amps.
  • Suitable for cables 0.65mm² to 1.30mm²
    Pack sizes 10, 100.