Page Graphics

Classic PVC Low Voltage Cable

Stereo Speaker Twin Cables

Twin flat figure of 8 cables suitable for wiring speaker systems in vehicles and in the home.

SPECIFICATIONS

  • Cores manufactured to BS6862 Part 1 1971, where applicable
  • Plain copper conductors, PVC insulated
  • Suitable for use at temperatures from -30°C to 70°C
  • Twins and multicores PVC sheathed at 70°C
  • Suitable for 12v and 24v systems (Maximum 100v)
  • Resistant to petrol, diesel, lubricating oils and diluted acids
  • Bespoke core and sheathing colours available on singles, twins, multicore and speaker cables (subject to MOQs)

Please contact the Sales Team if the colour combination you require is not listed.

Stereo Speaker Twin Cables

Part No *Conductor Specification (mm) Conductor Cross Section (mm²) Maximum Overall Diameter(mm) Nominal Current Rating (Amps)** Sheath Colours Reel Sizes (Metres)
550 2 x 12/0.20 2 x 0.35 3.6 x 1.7 2 Black – Black/White 30, 100, 500
551 2 x 16/0.20 2 x 0.5 3.9 x 1.9 3 Black – Black/White 30, 100, 500
552 2 x 24/0.20 2 x 0.75 4.3 x 2.1 6 Black – Black/Red 30, 100, 500
553 2 x 32/0.20 2 x 1.0 4.7 x 2.3 10 Black – Black/Blue 30, 100
554 2 x 21/0.30 2 x 1.5 5.9 x 2.9 15 Black – Black/White 30, 100


*The conductor specifications shown are representative configurations, actual cable strand may differ slightly, but will meet resistance values shown.

**Nominal current amerpage ratings are provided as a guide only and can vary depending on application, conditions and environmental factors.  If in doubt, please consult a qualified electrician.