Page Graphics

Classic PVC Low Voltage Cable

PVC Single Core Auto Cables

General purpose low voltage wiring cables suitable for use in the automotive, marine and allied industries.

SPECIFICATIONS

  • Cores manufactured to BS6862 Part 1 1971, where applicable
  • Plain copper conductors, PVC insulated
  • Suitable for use at temperatures from -30°C to 70°C
  • Twins and multicores PVC sheathed at 70°C
  • Suitable for 12v and 24v systems (Maximum 100v)
  • Resistant to petrol, diesel, lubricating oils and diluted acids
  • Bespoke core and sheathing colours available on singles, twins, multicore and speaker cables (subject to MOQs)

 

Click here for a list of available colours (20KB)
 

PVC Single Core Auto Cables

Part No *Conductor Specification (mm) Conductor Cross Section (mm²) Maximum Overall Diameter  (mm) Nominal Current Rating (Amps)** Maximum Loading (Watts)   Resistance Per Metre at 20ºC (Ohms) Reel Sizes (Metres)
12 Volts 24 Volts
1598 9/0.30 0.65 2.5 5.75 69 138 0.0294 50
1600 14/0.30 1.0 2.7 8.75 105 210 0.0189 50
1603 28/0.30 2.0 3.4 17.5 210 420 0.0094 50
1605 44/0.30 3.0 4.2 27.5 330 660 0.0060 50
1606 65/0.30 4.5 5.1 35.0 420 840 0.0041 30 

*The conductor specifications shown are representative configurations, actual cable strand may differ slightly, but will meet resistance values shown.

**Nominal current amerpage ratings are provided as a guide only and can vary depending on application, conditions and environmental factors.  If in doubt, please consult a qualified electrician.