Page Graphics

Classic PVC Low Voltage Cable

PVC 4 Core Auto Cable

General purpose low voltage wiring cable suitable for use in the automotive, marine and allied industries.


  • Cores manufactured to BS6862 Part 1 1971, where applicable
  • Plain copper conductors, PVC insulated
  • Suitable for use at temperatures from -30°C to 70°C
  • Twins and multicores PVC sheathed at 70°C
  • Suitable for 12v and 24v systems (Maximum 100v)
  • Resistant to petrol, diesel, lubricating oils and diluted acids
  • Bespoke core and sheathing colours available on singles, twins, multicore and speaker cables (subject to MOQs)

The cores and sheaths can be produced in any colour (MOQs may apply).  Click here for a list of available colours (20KB)

Please refer to single core for resistance values.

PVC 4 Core Auto Cables

Part No *Conductor Specification (mm) Conductor Cross Section (mm²) Maximum Overall Diameter(mm) Nominal Current Rating (Amps)** Sheath Colour Core Colours Reel Sizes (Metres)
960 4 x 14/0.30 4 x 1.0 8.0 8.75 Black Brown, Green, Red, White. 30, 100

*The conductor specifications shown are representative configurations, actual cable strand may differ slightly, but will meet resistance values shown. (Please refer to single core for resistance values).

**Nominal current amerpage ratings are provided as a guide only and can vary depending on application, conditions and environmental factors.  If in doubt, please consult a qualified electrician.