Page Graphics

Thin Wall Low Voltage Cable

Thin Wall 5 Core Auto Cables

High temperature thin wall low voltage cables suitable for use in the automotive, marine and allied industries.  
These cables are specified as standard by manufacturers throughout Europe due to their high performance characteristics.


  • Cores manufactured to ISO 6722-1:2011 (Class B) 105°C
  • Plain Copper Conductors to BS EN 60228:2005 - PVC Insulated
  • Single core suitable for use at temperatures from -40°C to 105°C with excursions up to 120°C
  • Twins and multicores PVC sheathed at 70°C
  • Suitable for 12v and 24v systems (Maximum voltage 60v)
  • Reduced insulation gives considerable savings in weight and volume especially when used in large wiring harnesses
  • Good resistance to petrol, diesel, lubricating oils and diluted acids
  • PVC insulation offers good resistance to abrasion and cut through

The cores and sheaths can be produced in any colour (MOQs may apply).  

Click here for a list of available colours (20KB)

Please refer to single core for resistance values.

Thin Wall 5 Core Auto Cables

Part No *Conductor Specification (mm) Conductor Cross Section (mm²) Maximum Overall Diameter (mm) Nominal Current Rating (Amps)** Sheath Colour Core Colours Reel Sizes (Metres)
TW05/02 5 x 24/0.20 5 x 0.75 6.3 14.0 Black Brown, Green, Red, White, Yellow. 30, 100
TW05/01 5 x 32/0.20 5 x 1.0 6.3 16.5 Black 30, 100
TW05/03 4 x 32/0.20
1 x 28/0.30
4 x 1.0
1 x 2.0
7.6 16.5
Black 30, 100

*The conductor specifications shown are representative configurations, actual cable strand may differ slightly, but will meet resistance values shown. 

**Nominal current amperage ratings are provided as a guide only and can vary depending on application, conditions and environmental factors.  If in doubt, please consult a qualified electrician.