High temperature thin wall low voltage wiring cables suitable for use in the automotive, marine and allied industries. These cables are specified as standard by manufacturers throughout Europe due to their high performance characteristics.

Specifications

• Cores manufactured to ISO 6722-1:2011 (Class B) 105ºC
• Plain copper conductors to BS EN 60228:2005, PVC insulated
• Single core suitable for use at temperatures from -40ºC to 105ºC with excursions up to 120ºC
• Twins and multicores PVC sheathed at 70ºC
• Suitable for 12v or 24v systems (Maximum voltage 60v)
• Reduced insulation gives considerable savings in weight and volume especially when used in large wiring harnesses
• Good resistance to petrol, diesel, lubricating oils and diluted acids
• PVC insulation offers good resistance to abrasion and cut through

Low voltage, single insulated battery/starter and extra flexible battery cables

Low voltage, single insulated battery/starter and extra flexible battery cables typically utilised in automotive applications. Suitable for applications up to 60v.

Specifications

• Plain copper conductors, PVC insulated -15ºC to 70ºC (starter)
• Plain copper conductors, PVC insulated -30ºC to 70ºC (extra flexible cables)

Double insulated battery/welding cable

Double insulated battery/welding cable designed to withstand severe climatic and mechanical conditions. The sheath remains flexible at both high and low temperatures and is flame retardant.

Specifications

• Manufactured in accordance with BS638 part 4 standard.
• Tinned copper conductors (orange only).
• High temperature separator.
• Butyl rubber insulation, rubber sheath 85ºC.

General purpose low voltage wiring cables suitable for use in the automotive, marine and allied industries.

Specifications

• Cores manufactured to BS6862 Part 1 1971, where applicable
• Plain copper conductors, PVC insulated
• Suitable for use at temperatures from -30°C to 70°C
• Twins and multicore PVC sheathed at 70ºC
• Suitable for 12v and 24v systems (maximum 100v)
• Resistant to petrol, diesel, lubricating oils and diluted acids
• Bespoke core and sheathing colours available on singles, twins, multicore and speaker cable (subject to MOQs)

Stereo speaker twin cable and high tension PVC ignition cable

General purpose low voltage wiring cables suitable for use when addressing specific needs of your automotive or marine build.

Specifications

• Twin flat figure of 8 cables suitable for wiring speaker systems in vehicles and in the home.
• Cores manufactured to BS6862 Part 1 1971, where applicable
• Plain copper conductors, PVC insulated.
• Suitable for use at temperatures from -30°C to 70°C
• Twins and multicore PVC sheathed at 70ºC
• Suitable for 12v and 24v systems (maximum 100v)
• Resistant to petrol, diesel, lubricating oils and diluted acids
• Bespoke core and sheathing colours available on singles, twins, multicore and speaker cable (subject to MOQs)

240 volt, rubber 3 core mains cables

Medium duty H05VV-F harmonised flexible mains cable, with PVC insulation and sheathing.

Specifications

• 3 core Tough Rubber Sheathed (T.R.S.) cables suitable for 110–240 volt mains application
• Manufactured in accordance with BS6500.
• Plain copper conductors, rubber insulated and sheathed

High temperature thin wall low voltage wiring cables suitable for use in automotive, marine and other harsh environments. The tinned copper conductors make this cable more resistant to corrosion.

Specifications

• Cores manufactured to ISO 6722-1:2011 (class B) 105°C
• Tinned Copper Conductors, PVC insulated
• Suitable for use at temperatures from -40ºC to 105ºC with excursions up to 120ºC
• Twins and multicore PVC sheathed at 70ºC
• Suitable for 12v and 24v systems (maximum 60v)
• Good resistance to petrol, diesel, lubricating oils and diluted acid
• Very good resistance to moisture
• PVC insulation saves weight and offers good resistance to abrasion and cut through
• Cables are printed with the specification on the insulation

Tinned copper PCV battery/extra flexible cables. The tinned copper conductors make this cable more resistant to corrosion. Single insulated  extra flexible battery cables designed for use in tough working conditions.

Specifications

• Resistant to petrol, lubricating oils and diluted acids
• PVC insulated -30ºC to 70ºC
• Extra flexible sheathing to aid installation - low voltage single insulated battery / starter cable.
• Suitable for applications up to 60v
• Suitable for harsher environments such as marine applications

High durability ISO 13297 cable; as per ISO13297:2021 - Small craft - Electrical systems - Alternating and direct current installations, this international standard for marine installers mandates that yellow coloured cable must be used as the DC negative if there is an AC system within the same craft, and uses black to denote negative. This is to distinguish between the AC/DC negative lines to engineers and technicians working on the craft.

Specifications

• Resistant to petrol, lubricating oils and diluted acids
• PVC insulated -30ºC to 70ºC
• Extra flexible sheathing to aid installation - low voltage single insulated battery / starter cable
• Suitable for applications up to 60v
• Suitable for harsher environments such as marine applications